PulseView™

VectorStar™ MS464xB Series Microwave Vector Network Analyzer User Interface Reference : PulseView™

PulseView™

Chapter Overview

This chapter provides information for the APPLICATION menu with controls for the PulseView™ application.Use of this feature requires installation of Option 42 (PulseView™) and Option 35 (IF Digitizer).

Other Application Menu Chapters

The other chapters in this manual on the APPLICATION menu with specific application feature focus are:

• Application Menus – Overview

• Multiple Source

• Broadband/mmWave

• Noise Figure (Option 41)

• Differential Noise Figure (Option 48)

• Mixer Setup

• NxN

• DifferentialView™ (True Mode Stimulus)

• IMDView™

• Advanced Fast CW

Application Menus and Dialog Boxes for PulseView™

The APPLICATION menu set for configuration and control of pulse features contains the following menus and dialogs:

• PULSEVIEW™ SETUP Menu

• PulseView™ Setup Menu – Profile Mode

• PulseView™ Setup Menu – Point in Pulse Mode

• PulseView™ Setup Menu – Pulse to Pulse Mode

• PulseView™ Setup Menu – Continuous Point in Pulse Mode

• PulseView™ Setup Menu – Continuous Profiling Mode

• PULSE MODE Menu

• PULSE RECEIVER Menu

• ADVANCED SETUP Menu

• PULSEVIEW™ CONFIGURATION Dialog Box

• Pulse Generator Configuration

• Pulse Measurement Setup

• Pulse Power Calibration Setup


	Anritsu Company 1-800-ANRITSU 10450-00040 Rev. AB