VectorStar™ MS464xB Series Microwave Vector Network Analyzer User Interface Reference : Noise Figure (Option 41)
 
Noise Figure (Option 41)
 
Chapter Overview
Other Application Menu Chapters
Application Menus and Dialog Boxes for Noise Figure
Noise Figure Overview
Noise Figure Procedure
Primary Application Menus and Noise Figure Dialogs and Menus
Transmission/Reflection Mode to Noise Figure Mode
Noise Figure Mode to Transmission/Reflection Mode
Noise Figure Menus and Dialogs
NF SETUP Menu
NF SETUP Menu – Receiver Cal
NF CONFIG Menu
NF ADVANCED Menu
NF ADVANCED Menu – Receiver Cal Offset
Chapter Overview
This chapter provides information on the APPLICATION menu and Noise Figure Measurement configuration, when the VNA is equipped with Option 41. The configuration process starts when the VNA application mode is changed to Noise Figure, which enables the noise figure measurement configuration and operation menus and dialogs.
Other Application Menu Chapters
The other chapters in this manual on APPLICATION menus with specific application feature focus are:
• Application Menus – Overview
• Multiple Source
• Broadband/mmWave
• Differential Noise Figure (Option 48)
• NxN
• PulseView™
• DifferentialView™ (True Mode Stimulus)
• IMDView™
• Advanced Fast CW
Application Menus and Dialog Boxes for Noise Figure
The NF SETUP menu set for configuration and control of noise figure contains the following menus and dialogs:
• Primary Application Menus and Noise Figure Dialogs and Menus
• Figure: APPLICATION Menu and NF SETUP Menu and Dialog Set
• Noise Figure Menus and Dialogs
• Figure: Noise Figure Measurement Menu Set
• NF SETUP Menu
• Figure: NF SETUP Menu
• NF CONFIG Menu
• Figure: NF CONFIG Menu and Related Field Toolbars
• NF ADVANCED Menu
• Figure: NF ADVANCED Menu: NF RCVRCAL OFFSET Menu – Option 41