 | |
Index | Description |
1 | Toolbar - See Toolbar. |
2 | Power sensor / analyzer information area showing model and serial number, communications port, and firmware version,Zero Sensor. |
3 | Displays setup and measurement readout area. The readouts displayed are mode dependent. Continuous Mode Numerical Display Area, Power Hunter Status Window, . |
4 | The display graticule provides power versus time representation of the power measurement waveform,Graticule Settings and Graphical Display Area. |
5 | These lower task bar parameter settings are available to select and change manually. Changes to these settings are applied by pressing the Enter key. (The lower task bar parameter settings are used in Continuous mode only.) |
6 | Click Apply above settings to apply the user selected settings changes. Changes to the settings will not take effect until after clicking this bar. |
7 | This side panel displays the settings for the mode of operation selected. |