VectorStar™ MS464xB Series Microwave Vector Network Analyzer Programming Manual : SCPI Commands : :SENSe{1-16}:CORRection:COLLect:MULTiple Subsystem
 
:SENSe{1-16}:CORRection:COLLect:MULTiple Subsystem
The:SENSe{1-16}:CORRection:COLLect:MULTiple subsystem command sets transmission through (thru) lines between one or more port pairs.
Calibration Setup Subsystems
These subsystems are used during various phases of calibration configuration setup:
• :CALCulate{1-16}:IMPedance:TRANsformation Subsystem
• :CALCulate{1-16}:REFerence Subsystem
• :SENSe{1-16}:CORRection:COLLect:METHod Subsystem
• :SENSe{1-16}:CORRection:COLLect:MICrostrip Subsystem
• :SENSe{1-16}:CORRection:COLLect:MSSS Subsystem
• :SENSe{1-16}:CORRection:COLLect:MULTiple Subsystem
• :SENSe{1-16}:CORRection:COLLect:MTRL[:CALa] Subsystem
• :SENSe{1-16}:CORRection:COLLect:MTRL:CALB Subsystem – 4-Port VNAs
• :SENSe{1-16}:CORRection:COLLect:TRL[:CALa] Subsystem
• :SENSe{1-16}:CORRection:COLLect:TRL:CALB Subsystem
• :SENSe{1-16}:CORRection:COLLect:TRL:SINGleton Subsystem – 4-Port VNAs
• :SENSe{1-16}:CORRection:COLLect:TRL:WAVeguide Subsystem
• :SENSe{1-16}:CORRection:COLLect Subsystem
• :SENSe{1-16}:CORRection:COLLect:WAVeguide Subsystem
• :SENSe{1-16}:CORRection:COLLect[:CALa]:PORT Subsystem
• :SENSe{1-16}:CORRection:INTerpolation Subsystem
• :SENSe{1-16}:CORRection:STATe Subsystem
:SENSe{1-16}:CORRection:COLLect:MULTiple:THRu <char> {<char>,<char>,<char>,<char>,<char>}
:SENSe{1-16}:CORRection:COLLect:MULTiple:THRu?
Description
The command adds one or more Transmission Throughs (Thrus) to the calibration process on the indicated channel. The use of Port 3 and/or Port 4 on a through requires a 4-port VNA instrument. The available throughs are:
• THRu12 = Through line between Port 1 and Port 2. The short-form is THR12.
• THRu13 = Through line between Port 1 and Port 3. The short-form is THR13.
• THRu14 = Through line between Port 1 and Port 4. The short-form is THR14.
• THRu23 = Through line between Port 2 and Port 3. The short-form is THR23.
• THRu24 = Through line between Port 2 and Port 4. The short-form is THR24.
• THRu34 = Through line between Port 3 and Port 4. The short-form is THR34.
Outputs the calibration process list of Transmission Throughs on the indicated channel.
Cmd Parameters
<char> THRu12 | THRu13 | THRu14 | THRu23 | THRu24 | THRu34
Query Parameters
<char> THR12 | THR13 | THR14 | THR23 | THR24 | THR34
Range
NA
Default Value
NA
Syntax Example
:SENS1:CORR:COLL:MULT:THR THR12, THR23, THR24
:SENS1:CORR:COLL:MULT:THR?